Category: NEC SL2100
-
How to Connect to the NEC SL2100 or SL1100 Phone System for Programming
This Tech Tip demonstrates how to connect a computer to the NEC SL2100 or NEC SL1100 phone system, in order to make programming changes. We’ll cover both PCPro and WebPro examples.
-
Setting the Time & Date Using a Phone on the NEC SL2100 or SL1100
This Tech Tip demonstrates how to set the the time and date on the NEC SL2100 or NEC SL1100 phone system, using the phone key pad. Any MLT phone can be used to complete these steps, including the 12 or 24 button digital or IP phones.
-
Set a Trunk to Ring an Extension on the NEC SL2100 or SL1100
This Tech Tip demonstrates how to set an incoming trunk to ring a specific extension on the NEC SL2100 or NEC SL1100 phone system. You can control which specific trunk rings the desired extension.
-
Remote Programming the NEC SL2100 or NEC SL1100
This Tech Tip demonstrates how both the NEC SL2100and NEC SL1100 phone systems can be conveniently programmed from a remote location via the PCPro Software.
-
Locating the Version, MAC Address & Hardware Key Code on the NEC SL2100 or SL1100
The software firmware version, MAC address and hardware key code are important pieces of information. This Tech Tip demonstrates how they can be easily located using any phone.
-
Locating the System IP & VoIPDB Address on the NEC SL2100 or SL1100
This Tech Tip demonstrates how to locate the System IP Address and VoIP Daughterboard IP Address from any phone, and update the addresses using the NEC PCPro Programming Software. This tip applies to both the NEC SL2100 and NEC SL1100 phone systems.
-
Automatic Trunk Line Seizure on the NEC SL2100 and SL1100
Automatic Trunk Line Seizure means that a phone line is automatically grabbed when the phone handset is lifted. This can be set using the PCPro Programming Software for both the NEC SL2100 and NEC SL1100 phone system.
-
Make a Line Ring a Specific Extension on the NEC SL2100 and SL1100
This Tech Tip demonstrates how to set up a personal line, in which a CO Phone Line rings only one specific extension.
-
Excluding an Extension from Ringing on the NEC SL2100 and SL1100
This Tech Tip demonstrates how to make a specific extension (station) not ring, when a call comes in to the NEC SL2100 or NEC SL1100
-
Changing Outbound Caller ID of a Digital Extension on the NEC SL2100 and SL1100
Sometimes a single user will need their own outbound Caller ID – for instance, if the user has their own private DID. This Tech Tip will demonstrate how to change a displayed caller id number on an outbound call made from the NEC SL1200 or NEC SL1100. (Digital extensions only)
-
Changing Outbound Caller ID of an IP Extension on the NEC SL2100 and SL1100
Sometimes a single user will need their own outbound Caller ID – for instance, if the user has their own private DID. This Tech Tip will demonstrate how to change a displayed caller id number on an outbound call made from the NEC SL200 or NEC SL1100. (IP extensions only)
-
Ringing an Extension when a Call Comes in on Specific Phone Line(s)
In a previous tip, we showed how to stop specific extensions from ringing when an incoming call comes in. This Tech Tip demonstrates how to make an extension ring only when a call comes in on a specific incoming phone line(s). This tip applies to both the NEC SL200 or NEC SL1100.
-
Configuring AP20 and ML440 VoIP DECT Cordless on the NEC SL2100 and SL1100
This Tech Tip demonstrates how to configure an AP20 DECT base station and ML440 DECT cordless VoIP handset using Plug and Play Registration. This tip applies to both the NEC SL2100 and NEC SL1100 phone systems.
-
Timers for Sending Calls to Voicemail on the NEC SL2100 and SL1100
This Tech Tip demonstrates the various timers used to send calls to Voicemail. We will give examples of incoming calls coming over POTS (CO) Lines, DIDs and Internal Transferred Calls. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.
-
Show Caller ID Without Ringing the Phone on the NEC SL2100 or SL1100
A common example for this Tech Tip would be a lawyers office, after hours, where the attorney might pick up a call if it is relevant to what they are working on, but doesn’t want to be disturbed by the constant ringing of the phone. This tip applies to both the NEC SL2100 and NEC…
-
Creating a Private Line on the NEC SL2100 or SL1100
This Tech Tip demonstrates how to program a trunk so that only one extension may use it for inbound or outbound calls – effectively creating a private line. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.
-
NEC SL2100 & SL1100 Database Troubleshooting
The NEC PCPro Software offers a report that allows you to compare they system’s currently programmed value against the NEC default values. If your system functions properly at default, but has issues with the programmed data, then comparing the two may assist with determining what might be causing the problem. This tip applies to both…
-
Two Companies Sharing One NEC SL2100 or SL1100
This Tech Tip will demonstrate how to share one NEC SL2100 or SL1100 phone system between multiple companies and provide examples of how to program Incoming Calls, Sending Calls to Voicemail, Setting the Trunk Destination to Voicemail and Outgoing Calls. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.
-
Basic Hotel Motel Application on the NEC SL2100 or SL1100
This Tech Tip demonstrates some common Hotel/Motel applications, such as Extension Numbering, Wake-Up Calls, 1-Digit Dialing, and DSS Console setup. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.
-
Dial-By-Name Directory on the NEC SL2100 or SL1100
This Tech Tip demonstrates how to program a dial-by-name directory using the party’s first name. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.
-
Recording an Auto Attendant Greeting Using a Phone
This Tech Tip demonstrates how a user can record an Auto Attendant Greeting using a telephone. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.
-
Automatic Trunk-to-Trunk Transferring & Forwarding on the NEC SL2100 or SL1100
This Tech Tip demonstrates two little known features: Automatic Trunk-to-Trunk Transferring and Trunk Forwarding. Through class of service, an operator, administrator or any extension permitted in class of service can redirect an incoming call by individual trunk to a pre-defined destination telephone number for each mode in the system. This tip applies to both the…
-
Full Time Voicemail Attendant on the NEC SL2100 and SL1100
This Tech Tip will demonstrate how to program a Full Time Auto-Attendant, meaning all incoming calls will be answered by the InMail Voicemail system immediately. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.